The product is water environmentally-friendly product, no environmental pollution, with good penetration, high adhesive strength; high and low temperature resistance and water damage resistance.
1)DS-CCWS can be filled into joint without slotting joints of road surface. Easy for construction and materials can be saved.
2)Compared with hot sealant, it has better fluidity and permeability, and fills road surface joint better.
3)Suitable for filling road surface joint with width less than 25 mm and depth of 5-50 mm.
4)Solidify within 2-4 hours after filling joint to reach water sealing and repair effects.
3. Product usage methods
1)For joint width is ≯12 mm, use blower to blow joint clean, and use mouth pot or special joint filler produced by our company to fill joint filling adhesive into joint directly. Scrape joint filling adhesive into joint with rubber scraper, and spread fine sand after filling joint.
2)For joint with width of 12～25mm, use blower to blow joint clean, and add partial powder materials into joint filling adhesive first and mix them uniformly. Use mouth pot or special joint filler produced by our company to fill joint filling adhesive into joint directly, and scrape joint filling adhesive into joint with rubber scraper and then spread fine sand after filling joint.